Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 16
Next »
Software
Release 06/2021 - 2.02
Topic | Description | comment | Author | SynView Version | Petalinux Version | FPGA Version | Device Sensor Version |
|---|
SynView Explorer | Brightness Control - BCRM Mode / Exposure Auto Color Management -BCRM Mode / White Balance Auto
→ If "Once" is chosen, "Once" stays active. "OFF" is not active. | IAM-85 | AKr | SynView-1.03.010.1090 |
2.02
|
|
34658
|
iAMGigEServer | Events can´t be send via GigE Server | . | MW | SynView-1.03.010.1090 | 2.02
|
|
|
SynView Explorer | Image Format: Pixel format:
YUV-frame is brighter than BGR8-frame | Issue IAM-76 | DP | SynView-1.03.010.1090 | 2.02 | | |
SynView Explorer | First frame occures to "flash" | | GD | SynView-1.03.010.1090 | 2.02 | 0x56010102, 0x5f7db0a3 | bcrm: 0000797500000300 |
SynView IP Config Tool sv.ipconf.x64 | Re-enable the GigE Vision Server autostart sometimes fails after power cycle. | | GD | SynView-1.03.010.1090 | 2.02 | | |
Older Release
Release 10/2020 - 1.04
Release 10/2020 - 1.04
Topic | Description | comment | Author | SynView Version | Petalinux Version | FPGA Version | BCRM Version |
|---|
SynView Explorer | Brightness Control - BCRM Mode / Exposure Auto Color Management -BCRM Mode / White Balance Auto
→ If "Once" is chosen, "Once" stays active. "OFF" is not active. | Issue IAM-85 | AKr | 1.03.010.1060 |
|
|
|
SynView Explorer | Events can´t be send via GigE Server | . | MW | 1.03.010.1061-8.10.2020 |
|
|
|
SynView Explorer | Timer/Puls generator can´t be enabled or disabled with Acquisition Start/Stop | . | MW | 1.03.010.1061-8.10.2020 |
|
|
|
SynView Explorer | TriggerMode: Trigger Invert operates sensor in free-run mode | | GD | 1.03.010.1061-19.10.2020 | 1.04 | 0x56010102, 0x5f7db0a3 | bcrm: 0000797500000300 |
SynView Explorer | StrobeMode: Strobe assigned to wrong edge | . | GD | 1.03.010.1061-19.10.2020 | 1.04 | 0x56010102, 0x5f7db0a3 | bcrm: 0000797500000300 |
SynView Explorer | StrobeMode: Strobe source: Static low remains high | . | GD | 1.03.010.1061-19.10.2020 | 1.04 | 0x56010102, 0x5f7db0a3 | bcrm: 0000797500000300 |
SynView Explorer | TriggerMode: Software trigger
→ Strobe not available | | GD | 1.03.010.1061-19.10.2020 | 1.04 | 0x56010102, 0x5f7db0a3 | bcrm: 0000797500000300 |
SynView Explorer | I/O
→ Line5 OUT: On -> Low, OFF → High | | GD | 1.03.010.1061-19.10.2020 | 1.04 | 0x56010102, 0x5f7db0a3 | bcrm: 0000797500000300 |
SynView Explorer | I/O:
→ Line4 OUT: No function | . | GD | 1.03.010.1061-19.10.2020 | 1.04 | 0x56010102, 0x5f7db0a3 | bcrm: 0000797500000300 |
SynView Explorer | Image Format: Pixel format:
Format Bayer GR 10 Packed cannot be displayed
Format Bayer GR 10 Packed cannot be displayed | Issue SYN-16 | GD | 1.03.010.1061-19.10.2020 | 1.04 | 0x56010102, 0x5f7db0a3 | bcrm: 0000797500000300 |
SynView Explorer | Image Format: Pixel format:
BayerRG8-frame is brighter than BGR8-frame | | GD | 1.03.010.1061-19.10.2020 | 1.04 | 0x56010102, 0x5f7db0a3 | bcrm: 0000797500000300 |
SynView Explorer | Image Format: Pixel format:
YUV-frame is brighter than BGR8-frame | Issue IAM-76 | DP | | | | |
SynView Explorer | First frame occures to "flash" | | GD | 1.03.010.1061-19.10.2020 | 1.04 | 0x56010102, 0x5f7db0a3 | bcrm: 0000797500000300 |
SynView Explorer | Soft image due to missing basic sensor configuration (gamma, black level) | | GD | 1.03.010.1061-19.10.2020 | 1.04 | 0x56010102, 0x5f7db0a3 | bcrm: 0000797500000300 |
Hardware
Topic | Description | Affects | Author |
|---|
Power supply | Power over Ethernet is not supported even though the camera will be detected as a PoE device by a PoE injector! | If the camera serial number has an X in the 9th digit (e.g. 14A2GEBAX2042013) | BH |
Input and Output Interface | OUT_GP1+ is out of order and can be used in current revison. Output stays GND. This means in SynView Explorer I/O: → Line4 OUT: No function (always one!) | If the camera serial number has an X in the 9th digit (e.g. 14A2GEBAX2042013) | BH |