SynView Explorer

Brightness Control - BCRM Mode / Exposure Auto

Color Management -BCRM Mode / White Balance Auto
→ If "Once" is chosen, "Once" stays active. "OFF" is not active.

Issue IAM-85

AKr

1.03.010.1060

SynView Explorer

Events can´t be send via GigE server

.

MW

1.03.010.1061-8.10.2020

SynView Explorer

Timer/puls generator can´t be enabled or disabled with Acquisition Start/Stop

.

MW

1.03.010.1061-8.10.2020

SynView Explorer

TriggerMode: Trigger Invert operates sensor in free-run mode

GD

1.03.010.1061-19.10.2020

1.04

0x56010102, 0x5f7db0a3

bcrm: 0000797500000300

SynView Explorer

StrobeMode: Strobe assigned to wrong edge

.

GD

1.03.010.1061-19.10.2020

1.04

0x56010102, 0x5f7db0a3

bcrm: 0000797500000300

SynView Explorer

StrobeMode:  Strobe source: static low remains high

.

GD

1.03.010.1061-19.10.2020

1.04

0x56010102, 0x5f7db0a3

bcrm: 0000797500000300

SynView Explorer

TriggerMode:  Software trigger
→ Strobe not available

GD

1.03.010.1061-19.10.2020

1.04

0x56010102, 0x5f7db0a3

bcrm: 0000797500000300

SynView Explorer

I/O
→ Line5 OUT:  On -> Low, OFF → High

GD

1.03.010.1061-19.10.2020

1.04

0x56010102, 0x5f7db0a3

bcrm: 0000797500000300

SynView Explorer

I/O:
→ Line4 OUT: no function

.

GD

1.03.010.1061-19.10.2020

1.04

0x56010102, 0x5f7db0a3

bcrm: 0000797500000300

SynView Explorer

Image Format:

Pixel format:
Format Bayer GR 10 Packed cannot be displayed
Format Bayer GR 10 Packed cannot be displayed

Issue SYN-16

GD

1.03.010.1061-19.10.2020

1.04

0x56010102, 0x5f7db0a3

bcrm: 0000797500000300

SynView Explorer

Image Format:

Pixel format:
BayerRG8-frame is brighter than BGR8-frame

DP cheks Issue IAM-76

GD

1.03.010.1061-19.10.2020

1.04

0x56010102, 0x5f7db0a3

bcrm: 0000797500000300

SynView Explorer

Image Format:

Pixel format:
YUV-frame is brighter than BGR8-frame

Issue IAM-76

DP

SynView Explorer

First frame occures to "flash"

DP

GD

1.03.010.1061-19.10.2020

1.04

0x56010102, 0x5f7db0a3

bcrm: 0000797500000300

SynView Explorer

Soft image due to missing basic sensor configuration

(gamma, black level)

DP will try ir filter

GD

1.03.010.1061-19.10.2020

1.04

0x56010102, 0x5f7db0a3

bcrm: 0000797500000300

Power supply

If the camera serial number has an X in the 9th digit (e.g. 14A2GEBAX2042013) Power over Ethernet is not supported even though the camera will be detected as a PoE device by a PoE injector!

BH

Input and Output Interface

If the camera serial number has an X or Y in the 9th digit (e.g. 14A2GEBAX2042013 )OUT_GP1+ is out of order and can be used in current revison. Output stays GND.

BH