iam |
| ||||||||
|---|---|---|---|---|---|---|---|---|---|
PC technology |
| ||||||||
sensor | 1/1.7” CMOS, Sony IMX226 | ||||||||
spectral sensitivity | 300 to 1100 nm | ||||||||
 | |||||||||
resolution (H×V) | 4072 x 3046 pixels | ||||||||
pixel size (H×V) | 1.85 × 1.85 μm | ||||||||
sensor size (diagonal) | 9.33 mm | ||||||||
shutter | rolling, global reset | ||||||||
trigger modes | free running, triggered mode | ||||||||
frame rate | 41 fps using RAW8 | ||||||||
video format | 10-bit, single tap | ||||||||
output pixel formats | YUV422 8-bit (UYVY) | ||||||||
RBG888 (RGB3) | |||||||||
RAW8 (GREY) | |||||||||
auto functions | auto exposure | ||||||||
automatic analog gain control | |||||||||
auto white balance (color models) | |||||||||
Further image controls | black level | ||||||||
De-Bayering up to 5×5 (color models) | |||||||||
DPC (factory calibrated) | |||||||||
exposure time | |||||||||
gain | |||||||||
gamma | |||||||||
hue (color models) | |||||||||
region of interest (ROI) | |||||||||
reverse X/Y | |||||||||
saturation (color models) | |||||||||
mount | C-mount | ||||||||
dimensions | 59 x 57.5 x 88 mm | ||||||||
 | |||||||||
weight | 400 g | ||||||||
power input | 24 VDC ±10%, 15 W (typical) or PoE | ||||||||
supported operating systems | Petalinux | ||||||||
regulations |
|
IA21202M ...
Besides the global list of Known Issues - Prototype Cameras there are the following model specific anomalies known.
ROI | Problem happens Issue occurs in trigger mode. Sensor accepts trigger input only , when the complete roi ROI (4072 x 3046) has been read out. If a small roi ROI in the upper left corner is defined, a wait waiting time ( T (readout complete roi) ) is needed, before the next trigger can be sent. |
|---|
...