iam |
| |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
PC technology | iam is a complete embedded system feature a quad-core ARM® Cortex-A53 platform running up to 1.5GHz. Combined with dual-core Cortex-R5 real-time processors, a Mali-400 MP2 graphics processing unit, and 16nm FinFET+ programmable logic,. The system offers a LAN interface and an Optocoupler interface. See Input and Output Interface for details. | Sensor
| ||||||||
sensor | 1/1.7“" 7” CMOS, Sony IMX226 | |||||||||
Spectral spectral sensitivity | 300 to 1100 nm | |||||||||
 | ||||||||||
resolution (H×V) | 4072 x 3046 pixels | |||||||||
Pixel pixel size (H×V) | 1.85 × 1.85 μm | |||||||||
Sensor sensor size (Diagonaldiagonal) | 9.33 mm | |||||||||
Shuttershutter | rolling, global reset | |||||||||
Trigger trigger modes | Free free running, Triggered triggered mode | |||||||||
Frame frame rate | 41 fps using RAW8 | |||||||||
Video video format | 10-bit, single tap | |||||||||
Output Pixel output pixel formats | YUV422 8-bit (UYVY) | |||||||||
RBG888 (RGB3) | ||||||||||
RAW8 (GREY) | ||||||||||
Auto auto functions | auto exposure | |||||||||
automatic analog gain control | ||||||||||
auto white balance (color models) | ||||||||||
Other Further image controls | Black black level | |||||||||
De-Bayering up to 5×5 (color models) | ||||||||||
DPC (factory calibrated) | ||||||||||
Exposure exposure time | ||||||||||
Gaingain | ||||||||||
Gammagamma | ||||||||||
Hue hue (color models) | ||||||||||
Region region of interest (ROI) | ||||||||||
Reverse reverse X/Y | ||||||||||
Saturation saturation (color models) | ||||||||||
Mountmount | C-mount | |||||||||
Dimensiondimensions | 59 x 57.5 x 88 mm | |||||||||
  | ||||||||||
Weightweight | 400 g | |||||||||
Power power input | 24 VDC ±10%, 15 W (typical) or PoE | |||||||||
Supported supported operating systems | Petalinux | |||||||||
Regulationsregulations |
|
IA21202M ...
Besides the global list of Known Issues - Prototype Cameras there are the following model specific anomalies known.
ROI | Problem happens Issue occurs in trigger mode. Sensor accepts trigger input only , when the complete roi ROI (4072 x 3046) has been read out. If a small roi ROI in the upper left corner is defined, a wait waiting time ( T (readout complete roi) ) is needed, before the next trigger can be sent. |
|---|
...