...
It is mandatory to have iAMGigEServer running on iam system to use the SynView IP Config Tool.
Installation of the latest version of SynView to host system. See Section Download latest SynView ExplorerPackage for download link.
During production the latest version of the SynView Explorer and iAMGigEServer is installed to camera. Only in special cases it is necessary to update the camera. See section SynView Update Tool for detailed information.
| Info |
|---|
After installation of latest Synview Prerelease the SynView IP Config Tool sv.ipconf.x64 can be found on your host-pc under the location:
|
...
Temporary Change of IP Settings
Open sv.ipconf.x64.exe tool.
Now you should see the iam camera under "device model" even if the camera is not in the correct subnet.
Enter below “Current IP settings” or “Restart IP configuration” for obtaining the persistent settings.
Press button "Force IP address".
...
Persistent Change of IP Settings
Open SynView IP Config Tool ( sv.ipconf.x64.exe) tool.
Now you should see the iam camera under "device model".
Press button "Connect and configure".
Enter below checkbox “Persistent IP address”
Press button "Use current IP address".
Press button "Apply and disconnect".
