...
Topic | Description | comment | SynView Version | Petalinux Version |
|---|---|---|---|---|
User Set: Speichern/als Default setzen funktioniert nicht, wenn der User "zu schnell" istsave does not work, when next load is done to fast. | Issue IAM-220 | SynView-1.03.014.1026 | 3.10 | |
AcquisitionFrameRateTimer Modus: AcquisitionFrameRate kann nicht erhöht werden nach Erhöhung und erneuter Erniedrigung ExposureTimemode: AcquisitionFrameRate cannot be increased after increase/decrease exposure time. | Issue IAM-219 | SynView-1.03.014.1026 | 3.10 | |
AcquisitionFrameRateTimer Modus: Acquisition bleibt stehen bei mode: acquisition stops if Exposure Auto = Continuous/Once. | Issue IAM-218 | SynView-1.03.014.1026 | 3.10 | |
AcquisitionFrameRateTimer Modusmode: Acquisition startet nicht nach Erhöhung Exposure Timedoes not start after increasing exposure time. | Issue IAM-217 | SynView-1.03.014.1026 | 3.10 | |
IMX265C, IMX264C: keine Frameerzeugung mit no frame output with BGR 8 format. | Issue IAM-214 | SynView-1.03.014.1026 | 3.10 | |
Color Transformation: schaltet sich aus wenn Start Acquisitionswitches to OFF when aqusition is started. | Issue IAM-210 | SynView-1.03.014.1026 | 3.10 | |
BGR 8 Format: Verpixelungen im LiveFrame bei Reduzierung format: wrong pixels can occur when Gamma,Contrast bei bestimmter Helligkeitis reduced by certain brightness. | Issue IAM-209 | SynView-1.03.014.1026 | 3.10 | |
BalanceRatio(Selector) not shown in as available in Bayer bayer mode. | Issue IAM-207 | SynView-1.03.014.1026 | 3.10 | |
IA2312C: Liste der angebotenen Pixelformate nicht korrektlist of pixelformats is not correct. | Issue IAM-206 | SynView-1.03.014.1026 | 3.10 | |
Trigger Modus : Acquisition bleibt stehen bei Triggerrate mit zu hoher Exposure Timewith trigger source timer: Acquisition stops when exposure time is to high. | Issue IAM-154 | SynView-1.03.014.1026 | 3.10 | |
Acquisition Frame Rate Control: Exposure Time kontrolliert die AcquFrameRateexposure time controls the AcquFrameRate. | Issue IAM-149 | SynView-1.03.014.1026 | 3.10 | |
Color Transformation: Defaultwert für default-value for Color Transformation Value Selector=Offset 2 anstatt instead of Gain 00. | Issue IAM-148 | SynView-1.03.014.1026 | 3.10 | |
Minwert von Feld minimal value of field "Exposure Auto Max Time" ist kleiner als minimale Exposure Timeis smaler than minimal exposure time. | Issue IAM-147 | SynView-1.03.014.1026 | 3.10 | |
Mono 8 heller als is brighter as Mono10/12. | Issue IAM-142 | SynView-1.03.014.1026 | 3.10 | |
Trigger Modus: Acquisition bleibt stehen bei Triggerrate mit zu hoher Exposure Timeacquisition stops with triggerrate in relation with too high exposure time. | Issue IAM-123 | SynView-1.03.014.1026 | 3.10 | |
Acquisition Frame Rate: write failed Meldung in bestimmter Situationmessage can occur . | Issue IAM-122 | SynView-1.03.014.1026 | 3.10 | |
User Set Default "none": Daten werden überschriebendata will be overwritten. | Issue IAM-121 | SynView-1.03.014.1026 | 3.10 | |
Digital I/O Control, Line Source "Selected Trigger" liefert keinen Outputdelivers no frame output. | Issue IAM-114 | SynView-1.03.014.1026 | 3.10 | |
Strobe Source "Static High": verhält sich wie behaves like "Static Low". | Issue IAM-112 | SynView-1.03.014.1026 | 3.10 | |
ColorTransformation: wenn ausgeschalten kommt es trotzdem zur Farbänderungif switched to off, it still affects the colors of the frame. | Issue IAM-165 | SynView-1.03.014.1026 | 3.10 | |
IA1503, Sensor Strobe: kein Output bei bestimmter no Frame-output with certain Exposure Time kombiniert mit combined with Width, Height. | Issue IAM-189 | SynView-1.03.014.1026 | 3.10 |
...