OpenSSH

Introduction

The smart vision system iam is designed to be controlled over an Open-Secure Shell (SSH) connection. Practically every Unix and Linux system includes the ssh command. This command is used to start the SSH client program that enables secure connection to the SSH server on a remote machine. The ssh command is used from logging into the remote machine, transferring files between the two machines, and for executing commands on the remote machine.

System Requirements:

The iam system needs to be bootet. Check your network settings by using the ping command as discribed above.

The host need a SSH-Server. You can install openssh-server with the following command on a linux system:

sudo apt-get install openssh-server

Bevore on can establish an OpenSSH connection you need to add the camera to your "known host systems" by the command below

ssh-keygen -f "/home/$USER/.ssh/known_hosts" -R 192.168.1.10

Usefull commands:

Open an SSH connection

For open an shell on the camera use the following command:

ssh root@192.168.1.10

it can be cloesed by typ in the command

exit

OpenSSH with remote window support

If on need X-Server Support the -Y or -X command musst be added.

ssh -Y root@192.168.1.10

File Transfer

pull example:

scp root@192.168.1.10:/home/root/yourfile.txt

push example:

scp yourfile.txt root@192.168.1.10:/home/root/

If on want to transfere a complete folder on will use the recursive command -r. The command below will transfer the files from your-director to the location /home/root/your-director on iam camera.

scp -r your-director root@192.168.1.10:/home/root/

CPU Load example

The following example shows how to start an terminal application step by step as an example of display the current processes and services running on the camera system.

1. Open an OpenSSH connection from your host system

   ssh root@192.168.1.10

2. On will get asket for the root passwort.
   Do not get confused hence there will not be a display feedback while tiping.

3. Start the comand line application top on the system

   

4. for exit the application on can use the comand ctrl+c .