Introduction
With the release of Matrox Imaging Library (MIL) X, Matrox now offers support for ARM processor architectures.
For more information about MIL, we refer to the product owner´s online presence: https://www.matrox.com/en/imaging/products/software/sdk/mil
If you are interested in using Matrox Imaging Library (MIL) on iam please contact our sales.
Installation
Tested with mil-full-10.42_281_arm64.tar.gz
To install MIL on iam, the following steps are necessary:
Copy mil-full-10.42_281_arm64.tar.gz to /home/root
Use an OpenSSH connection
scp mil-full-10.42_281_arm64.tar.gz root@192.168.1.10:/home/root
Untar the file with following commands:
ssh root@192.168.1.10
tar -xvf mil-full-10.42_281_arm64.tar.gz -C /opt/ && source /opt/matrox_imaging/setup.sh
MIL will be installed to /opt/matrox_imaging . A reboot would be necessary for having the MIL software added to your PATH.
Licensing: Start milconfig, go to Licensing, activate and enter the license key there. milconfig is in /opt/matrox_imaging/tools which should have been added to your PATH.
Deployment
iAMGigEServer has to be stopped, when using MIL examples.
There are multiple examples all under
/opt/matrox_imaging/mil/examples
Most of these examples need a graphical interface. Therefore start these examples with X-Server support:
See using X-Server on a Windows Host System
ssh -X root@192.168.1.10
Attachments
🔍 References
👥 contact NET