Interface Break Out Boards

CBB1A R2 Break out Board

incl. DIN rail mount

075IOAD - Trigger, Strobe and IO Test Board

Trigger, Strobe and IO Test Board. Can be used to plug two iam cameras crossed together (OUT → IN , IN ← OUT).

CAM1: Primary Camera Connector

Can be fastened on backside of camera using 2x M2x6 srews (Bottom Side Connector J2) or by using discrete wire assembly from samtec SFSD-07-28-G-XX.XX-DR-NUS plugged into topside connecotr J1.

CAM2: Secondary Camera Connector

Secound iam camera can be connected crossed (OUT1 → IN2 , IN1 ← OUT2) by using discrete wire assembly from samtec SFSD-07-28-G-XX.XX-DR-NUS plugged into topside connecotr J3.

J3/J10 - AUX Power Supply

075IOAD can be powerd by 24V supply using J10 connector or J3 srew terminal. If J4 or J10 is used iam CAM1 is always powerd as well.

CAM2 can be powerd as well by jumping “CAM Power” on Terinal J13.

J11-12 - Jumper Terminals

With the Jumper Terminals J11 and J12 the camera IO-terminals can be supplied with AUX Power so additional components like LEDs and bush buttoms can be used.

See 075IOAD20_schematic.pdf for details.

Documentation

	File	Modified

Errata

Revision 2.0

J6

silksreen labeling is wrong

TRIG+ is IN_TRIGGER-

TRIG- is IN_TRIGGER+

should be swaped

D8, D9