Content:

Safety Precautions

Read before usage

Before using the product, read these safety precautions carefully. Important information is shown in this operational manual to protect users from injuries and property damages, and to enable them to use the product safely and appropriately. Please be sure to thoroughly understand the meaning of the following signs and symbols before reading the main text that follows, and observe the instructions given herein.

Disclaimer

Note that all data and illustrations are subject to error, change and omissions without notice.

Introduction

Definition of Safety Signs

Safety Signs

Description

WARNING

Indicates a potentially hazardous situation that may result in death or serious injury (*1) in the event of improper handling.

*1: “Serious injury” refers to cases of loss of eyesight, wounds, burns (high or low temperature), electric shock, broken bones, poisoning, etc., which leave after-effects or which requires hospitalization or a long period of outpatient treatment of cure.

CAUTION

Indicates a potentially hazardous situation that may result in light to moderate injuries (*2) or only in property damage (*3) in the event of improper handling.

*2: "Light to moderate injuries" refers to injuries, burns, electric shock etc. that do not require hospitalization or long-term treatment.

*3: "Property damage" refers to cases of extensive damage involving damage to buildings, equipment, farm animals, pet animals and other belongings.

Explanation of Safety Symbols

Safety Symbols

Description

PROHIBITED

This sign indicates PROHIBITION (Do not).

The content of prohibition is shown by a picture or words beside the symbol.

MANDATORY

This sign indicates MANDATORY ACTION (You are required to do).

The content of action is shown by a picture or words beside the symbol.

General Handing

Intended use

Intended use of NET NEW ELECTRONIC TECHNOLOGY GMBH product is the integration into vision systems by professionals. All NET NEW ELECTRONIC TECHNOLOGY GMBH product is sold in a B2B setting.

Warnings

	Risk of burns A camera in operation can reach temperature levels which could cause burns
	Injury by falling cameras or lenses A falling camera or lens can cause injury.
	Risk of cuts by sharp edges of lens mounts The threads of the lens mount and mounting points can have sharp edges.
	Unplug Stop operation immediately when any abnormality or defect occurs. If abnormal conditions are present, such as smoke, a burning smell, ingress of water or foreign matter, or if the equipment is dropped or malfunctions, fire or electric shock may result. Be always sure to disconnect the power cable from the wall socket at once and contact your dealer.
	Never pull apart Do not disassemble, repair, or modify the equipment. Otherwise, fire or electric shock may result. For internal repair, inspection, or cleaning, contact your sales representative.
Avoide	Do not place anything on the equipment. If metallic objects, liquid, or other foreign matter enters the equipment, fire or electric shock may result.
Avoide	Do not install the equipment in an unstable or inclined location or locations subject to vibration or impact. Otherwise, the equipment may topple over and cause personal injury.
Do not touch	During an electrical storm, do not touch the power cable and the connection cable. Otherwise, an electric shock may result.
Instruction	Use the specified voltage. Use of an unspecified voltage may result in fire or electric shock.
Avoid	Do not handle roughly, damaged, fabricated, bent forcefully, pulled, twisted, bundled, placed under heavy objects or heated the power cable and the connection cable. Otherwise, fire or electric shock may result.

Cautions

	Observe the following when installing the equipment: Do not cover the equipment with a cloth, etc. Do not place the equipment in a narrow location where heat is likely to accumulate. Otherwise, heat will accumulate inside the equipment, possibly resulting in a fire. Do not disassemble, repair, or modify the equipment. Otherwise, fire or electric shock may result. For internal repair, inspection, or cleaning, contact your sales representative.
	Use only specified the power cable and the connection cables. Otherwise, fire or electric shock may result.
	Do not give strong impact against the equipment. It may cause the trouble.

Cameras without closed housings

Cameras without housing or with incomplete housing must be shielded against EMC emission by professionals according to local EMC provisions.

Legal Notice

Open Source Licenses and Source code files

To get the license and source details for a iam software project see section Open Source Licenses and Source code files.

The section contains all the 3^rd party open source Licenses and Source code files.

The section also provides the optionally downloadable ‘License and Sources’ for each iam camera based on its release version.

Regulatory notices

The cameras should be used with properly shielded cables (and other equipment) as recommended in this manual. Please contact us if you need further information regarding the necessary equipment.

RoHS

~~The product fulfills the requirements of the~~ ~~EU directive RoHS 2020/65/EU~~ ~~in the currently valid version from 8.June 2011 regarding the restrictive use of certain hazardous materials in electric applications within the allowable limits.~~

Following information is only for EU-member states:

The use of the symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed correctly, you help to prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about the take-back and recycling of this product, please contact your supplier where you purchased the product.

Legal Notice and Safety Precautions