Connector and cable description
Ethernet connector
iam is equipped with a standard Ethernet connector, 8P8C modular plug, often also referred to RJ-45. |
I/O Connector and Pinout
14-pin DLP (dual-inline-pin) connector for digital I/O and power input. An adapter cable is available (see Section “Accessories”).
Connector Pinout TFM-107-02-L-DH.pdf | Mates Pinnout SFSD-07-XXX-G-XX.XX-SR |
|---|---|
 |  |
Pinout
If the camera serial number has an X or Y in the 9th digit (e.g. 14A2GEBAX2042013) the I/O connector has the Prototype pinout!
Pin # | Schematic Name | note | Prototype pinout (s. note above) s. Known Issues |
|---|---|---|---|
1 | AUX_POWER | auxiliary power supply voltage | |
2 | GND_P | auxiliary power supply ground | |
3 | IN_TRIGGER+ | Optocoupler Input TRIGGER Anode | |
4 | IN_TRIGGER- | Optocoupler Input TRIGGER Cathode | |
5 | IN_ENC1+ | Optocoupler Input 1 Cathode | Optocoupler Input 1 Anode |
6 | IN_ENC2+ | Optocoupler Input 2 Cathode | Optocoupler Input 2 Anode |
7 | IN_ENC3+ | Optocoupler Input 3 Cathode | Optocoupler Input 3 Anode |
8 | IN_ENC_GND | Optocoupler 1-3 Input Anode | Optocoupler 1-3 Input Cathode |
9 | OUT_GP1+ | Optocoupler Output 1 Collector | Out of order (Always on!) |
10 | OUT_GP2+ | Optocoupler Output 2 Collector | |
11 | OUT_GP_GND | Optocoupler Output 1-2 Emitter | |
12 | OUT_STROBE+ | Optocoupler Output STROBE Collector | |
13 | OUT_STROBE- | Optocoupler Output STROBE Emitter | |
14 | SGND_IO | Cable Shield |
Cable Assembly
This cable is fully shielded.