| Excerpt |
|---|
...
| Table of Contents |
|---|
Introduction
...
...
Getting started with the Windows Host System
Introduction
Linux and MacOSX supports openSSH with X-Server forwarding natively. In case of Windows some special tools are required. In this section an introduction is given.
After the step “configure your windows ethernet adapter
...
” the settings can be tested with ping command:
| Code Block |
|---|
ping 192.168.1.10 |
System
...
Requiremqents:
In order to view a live stream, for example with synview
...
running on the camera, procede accordingly:
Install PuTTY on your Windows machine
PuTTY will execute the SSH-connection to iam.Install Xming
Xming
...
executes the graphical interface on
...
Windows.
...
Installing WinSCP is helpful on any host system.
WinSCP is a program to transfer files from
...
and to
...
iam
...
.
...
...
| patterns | *.exe,*.msi |
|---|
WinSCP -
...
File transfer to camera
...
| Info |
|---|
WinSCP is a program to transfer files from |
...
and to |
...
iam |
...
The configuration of WinSCP should look
...
alike:
...
...
iam
...
asks for a password.
| Tip |
|---|
The password is |
PuTTY and Xming - Open applications with graphical user interfaces:
Xming
...
To apply X-Server forwarding
...
start the Xming
...
server first.
...
A link should be in the Windows start menu.
| Tip |
|---|
After launching |
...
, the Xming Symbol |
...
the task bar. |
...
When starting Xming for the first time,
...
the
...
Windows firewall may ask you to create an exception for Xming.
Configuration of
...
PuTTY:
Insert the iam
...
IP address
192.168.1.10in "Session→Host name"
...
Configure "Connection->SSH→X11" as follows:
...
| Info |
|---|
...
Configuration help page: http://www.geo.mtu.edu/geoschem/docs/putty_install.html |
...
When connecting to iam the first time
...
, the following warning
...
may show up. To procede, confirm with "yes".
...
...
After opening that connection, login as
| Tip |
|---|
User: Password: |
WinSCP, PuTTY and Xming - Put everyting together
It is possible to start PuTTY with the same settings from WinSCP
...
...
For achiving X-Server forwarding as well it is necessary to edit the “WinSCP temporary session” settings in PuTTY once:
...
| Tip |
|---|
Do not forget to save afterwards! |
Start SynView:
Type into the console:
|
| Info |
|---|
It is |
...
a common |
...
source of |
...
errors to operate |
...
a monochrome sensor in the |
...
color space. |
...
For monochrome sensors change the |
Please be aware
...
of the low frame refresh rate with this type of connection.
A better refresh rate will be achieved with the "
...
GigE Vision server of
...
SynView" in the future.
For more information see section
...
SynView above.
Start
...
HALCON viewer from then test_halcon_samples:
| Info |
|---|
...
HALCON can be |
...
pre-installed to |
...
the camera. See |
...
HALCON for more information. |
Type into the console:
|
| Info |
|---|
"Image Format Control → Pixel Format" to Mono8 is set inside "test_halcon_live_view" |
For more information see section
...
🔍 References
🔗 related content
👥 contact NET
...
HALCON .
...