Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Excerpt

Connector and cable description

Ethernet connector


All the grounds from individual connectors are connected inside the camera.


I/O Connector and Pinout

17-pin male M12 connector for digital i/o (optocoupler and TTL inputs/outputs) and power input.

CORSIGHT I/O connector

CORSIGHT I/O adapter cable,

Image Added

Image Added

An adapter cable is available (see Section “Accessories”), with D-sub 25-pin female interface connector

Image Removed

Image Removed

Pinout

. The table below lists the pinouts also for the connectors of the adapter cable.

I/O connector, pinout (including pin numbers on the D-sub-25 adapter cable

)If the camera serial number has an X or Y in the 9th digit (e.g. 14A2GEBAX2042013

)

the I/O connector has the Prototype pinout!

Pin #

Signal

D-Sub 25

1

Power In-

12

2

Power In+

19

3

Optocoupler Input 3 Anode

7

4

Ground

5

5

Optocoupler Output 1-3 Collector

10

6

Optocoupler Output 0 Emitter

9

7

Optocoupler Output 1 Emitter

11

8

Optocoupler Output 3 Emitter

24

9

TTL Input

21

10

TTL Output

20

11

Optocoupler Input 2 Anode

6

12

Optocoupler Input 0 Cathode

2

13

Optocoupler Input 0 Anode

1

14

Optocoupler Output 0 Collector

8

15

Optocoupler Output 2 Emitter

25

16

Optocoupler 1 Input Anode

3

17

Optocoupler 1-3 Input Cathode

4

Pins 13, 14, 15, 16, 17, 18, 22, 23 on the D-sub 25 connector are not connected.

Cable Assembly

Info

An adapter cable is available (see Section “Accessories”), with D-sub 25-pin female interface connector. The table below lists the pinouts also for the connectors of the adapter cable. This cable is fully shielded.

PDF
nameiocable.pdf


PC system connector

24-pin female M16 connector for DP++, RS232 and USB 2.0.

Image Removed

Image Added

CORSIGHT PC System connector

An adapter cable are available (see Section “Accessories”), separating individual signal groups into three dedicated connectors: DP++ male, USB Type A female, and RS232 (D-sub 9-pin male). The table below lists the pinouts also for the connectors of the adapter cable.

CORSIGHT PC system adapter cable, DP++ connector

CORSIGHTPC system adapter cable, USB connector

CORSIGHT PC system adapter cable, D-sub 9-pin connectors (RS-232)

CORSIGHT Ethernet connector
Pinout

PC system connector, pinout (including pin numbers on the DP++/USB/RS232 adapter cable)

M16

Signal

DP

USB

RS-232

1

ML0+

12

-

-

2

ML3-

1

-

-

3

ML2+

6

-

-

4

ML2-

4

-

-

5

ML3+

3

-

-

6

ML0-

10

-

-

7

ML1+

9

-

-

8

ML1-

7

-

-

9

AUX-

17

-

-

10

GND

2, 5, 8, 11, 16

-

-

11

Hot Plug

18

-

-

12

+5V

-

-

-

13

+5V

-

-

-

14

GND

-

4

-

15

GND

-

-

-

16

AUX+

15

-

-

17

USB-

-

2

-

18

+5V USB

-

1

-

19

GND

-

-

5

20

RS232_TX

-

-

3

21

CONF1

13

-

-

22

RS232_RX

-

-

2

23

+5V USB

-

-

-

24

USB+

-

3

-

-

Shield

-

-

-

Pins 14, 19, 20 on the DP connector are not connected.

Pins 1, 4, 6, 7, 8, 9 on the RS232 D-sub 9 connector are not connected.

The cable carries following signals via twisted pair wires: ML0+/ML01, ML1+/ML1-, ML2+/ML2-, ML3+/ML3-, AUX+/AUX-, USB-/USB+.

All grounds are connected together.

Ethernet connector

8-pin female M12 Ethernet connector.

Image Removed

Ethernet RJ-45 connector
Image Added

An adapter cable is available (see Section “Accessories”), with standard Ethernet connector, 8P8C modular plug, often also referred to as RJ-45.

Image Modified

CORSIGHT Ethernet connector, pinout

Pin

Signal (1000BASE-T)

Signal (10BASE-T,

100BASE_TX)

Pin RJ-45

1

BI_DC-

NC

5

2

BI_DD+

NC

7

3

BI_DD-

NC

8

4

BI_DA-

TX-

2

5

BI_DB+

RX+

3

6

BI_DA+

TX+

1

7

BI_DC+

NC

4

8

BI_DB-

RX-

6

Status LED

The CORSIGHT cameras are equipped with a set of status LED's. The positions of the LED's on camera's side is shown on the figure below. The purpose of the individual LED's (starting from connector side) is:

  • WLAN activity (blue)

  • User LED (green, software programmable)

  • Ethernet speed (green, still for 1GB, blinking for 100Mb Ethernet)

  • Ethernet link (orange)

  • Power (green)

  • SATA activity (orange)