Content:
| Excerpt | |
|---|---|
|
Safety Precautions
| Tip |
|---|
Read before usageBefore using the product, read these safety precautions carefully. Important information is shown in this operational manual to protect users from injuries and property damages, and to enable them to use the product safely and appropriately. Please be sure to thoroughly understand the meaning of the following signs and symbols before reading the main text that follows, and observe the instructions given herein. |
Disclaimer
Note that all data and illustrations are subject to error, change and omissions without notice.
Introduction
Definition of Safety Signs
...
Safety Signs
...
Description
...
| Note |
|---|
WARNING |
...
| Expand | ||
|---|---|---|
| ||
*1: “Serious injury” refers to cases of loss of eyesight, wounds, burns (high or low temperature), electric shock, broken bones, poisoning, etc., which leave after-effects or which requires hospitalization or a long period of outpatient treatment of cure. |
...
CAUTION
...
| Expand | ||
|---|---|---|
| ||
*2: "Light to moderate injuries" refers to injuries, burns, electric shock etc. that do not require hospitalization or long-term treatment. *3: "Property damage" refers to cases of extensive damage involving damage to buildings, equipment, farm animals, pet animals and other belongings. |
Explanation of Safety Symbols
...
Safety Symbols
...
Description
...
| Warning |
|---|
PROHIBITED |
...
This sign indicates PROHIBITION (Do not).
The content of prohibition is shown by a picture or words beside the symbol.
...
| Tip |
|---|
MANDATORY |
...
This sign indicates MANDATORY ACTION (You are required to do).
The content of action is shown by a picture or words beside the symbol.
General Handing
Intended use
Intended use of NET NEW ELECTRONIC TECHNOLOGY GMBH product is the integration into vision systems by professionals. All NET NEW ELECTRONIC TECHNOLOGY GMBH product is sold in a B2B setting.
Warnings
...
| Note |
|---|
Risk of burns A camera in operation can reach temperature levels which could cause burns |
...
| Note |
|---|
Injury by falling cameras or lenses A falling camera or lens can cause injury. |
...
| Note |
|---|
Risk of cuts by sharp edges of lens mounts The threads of the lens mount and mounting points can have sharp edges. |
...
| Note |
|---|
Unplug Stop operation immediately when any abnormality or defect occurs. If abnormal conditions are present, such as smoke, a burning smell, ingress of water or foreign matter, or if the equipment is dropped or malfunctions, fire or electric shock may result. Be always sure to disconnect the power cable from the wall socket at once and contact your dealer. |
...
| Note |
|---|
Never pull apart Do not disassemble, repair, or modify the equipment. Otherwise, fire or electric shock may result. For internal repair, inspection, or cleaning, contact your sales representative. |
...
Avoide
...
| Note |
|---|
Do not place anything on the equipment. If metallic objects, liquid, or other foreign matter enters the equipment, fire or electric shock may result. |
...
Avoide
...
| Note |
|---|
Do not install the equipment in an unstable or inclined location or locations subject to vibration or impact. Otherwise, the equipment may topple over and cause personal injury. |
Do not touch
...
| Note |
|---|
During an electrical storm, do not touch the power cable and the connection cable. Otherwise, an electric shock may result. |
...
Instruction
...
| Note |
|---|
Use the specified voltage. Use of an unspecified voltage may result in fire or electric shock. |
Avoid
...
| Note |
|---|
Do not handle roughly, damaged, fabricated, bent forcefully, pulled, twisted, bundled, placed under heavy objects or heated the power cable and the connection cable. Otherwise, fire or electric shock may result. |
Cautions
...
Observe the following when installing the equipment:
Do not cover the equipment with a cloth, etc.
Do not place the equipment in a narrow location where heat is likely to accumulate.
Otherwise, heat will accumulate inside the equipment, possibly resulting in a fire.
Do not disassemble, repair, or modify the equipment. Otherwise, fire or electric shock may result. For internal repair, inspection, or cleaning, contact your sales representative.
...
Use only specified the power cable and the connection cables. Otherwise, fire or electric shock may result.
...
Do not give strong impact against the equipment. It may cause the trouble.
...
Cameras without closed housings
Cameras without housing or with incomplete housing must be shielded against EMC emission by professionals according to local EMC provisions.
Legal Notice
Open Source Licenses and Source code files
To get the license and source details for a iam software project see section Open Source Licenses and Source code files.
The section contains all the 3rd party open source Licenses and Source code files.
The section also provides the optionally downloadable ‘License and Sources’ for each iam camera based on its release version.
Regulatory notices
The cameras should be used with properly shielded cables (and other equipment) as recommended in this manual. Please contact us if you need further information regarding the necessary equipment.
RoHS
The product fulfills the requirements of the EU directive RoHS 2020/65/EU in the currently valid version from 8.June 2011 regarding the restrictive use of certain hazardous materials in electric applications within the allowable limits.
Following information is only for EU-member states:
...
...
CORSIGHT is a vision system with embedded computer providing maximum flexibility in industrial applications for decentralized image processing. CORSIGHT runs under Windows or Linux and with any common image processing software. Its solid housing, interfaces and connectors are in accordance to industrial standards.
| Excerpt | ||
|---|---|---|
| ||
Embedded PC with Intel Atom E3845 1.91GHz (CORSIGHT II) Intel Atom E3940 1.6 GHz (CORSIGHT III) 4 GB DDR3/1333MHz (up to 8 GB on request) 16 GB built-in SATA-SSD flash disk (up to 32 GB on request) µSD card slot Gigabit Ethernet interface, USB 2.0 interface, DP++ output 2× WLAN antenna connector, LUT for image manipulation MPEG-4/H264 encoder/decoder |
product name | CORSIGHT |
PC technology
| Embedded PC with Intel Atom E3845 1.91GHz (CORSIGHT II) Intel Atom E3940 1.6 GHz (CORSIGHT III) 4 GB DDR3/1333MHz (up to 8 GB on request) 16 GB built-in SATA-SSD flash disk (up to 32 GB on request) µSD card slot Gigabit Ethernet interface, USB 2.0 interface, DP++ output 2× WLAN antenna connector, LUT for image manipulation MPEG-4/H264 encoder/decoder |
sensors | CMOS, monochrome/NIR & Bayer encoded color, progressive scanning, various trigger modes |
sensor specific information | Refer to Appendix A, Technical specifications for individual models |
image acquisition & transfer | DMA to the CORSIGHT host memory |
lens mount | C-mount (CS-mount on request) |
dimensions | 65×109×73 mm (W×H×D, without connectors) |
weight | 516 g |
power input | 24 ±10% VDC, 15 W (typical), 25 W (max.) or PoE+ |
digital I/O | 4×opto in, 4×opto out, TTL in, TTL out, RS232 interface |
supported operating systems DMA | Microsoft Windows Embedded Standard 7 (WES7) / Windows 10 (IoT), Linux |
Directly supported image processing libraries Adaptive Vision Studio, Halcon, ActivVisionTools, Common Vision Blox, MATLAB, OpenCV | |
order information | contact our sales team > http://net-gmbh.com/ |