Table of Contents
| Excerpt | |
|---|---|
|
Software Tools and System Requirements
Hardware
iam embeddes smart vision camera system
PoE+ Injector(see Known Issues ) or beak-out-board with external power supplyNetzwerk Cable (Class 6)
Host PC System: Linux or Mac prefered if you do not have a linux system you should use the virtual machine image below.
Software
You can set up the camera in the three different ways
Use an Native Linux or Mac host
Using a Windows Machine as discribed in section Windows Host System
Use our Virtual Machine Disk image on any OS with Virtual Box as discribed in section Virtual Host System
| Info |
|---|
Only a Linux host or a virtual Linux machine will support all features like crosscompiling. |
Quick-Start Guide
|
The purpose of this guide is to obtain a live image from
...
iam with Synview Explorer. SynView is a software developed by
...
NET and is used both on iam
...
cameras and
...
the user´s host system.
...
There are two options to
...
stream a live image to
...
the host system
...
:
With iAMGigEServer on iam
...
and
...
SynView Explorer on your host system
...
.
...
By running the SynView Explorer directly on iam
...
and using openSSH with X-Server
...
forwarding for display.
Option 1
...
is
...
straightforward and already pre-installed on iam. Option 2 has relevance as it can be similarly used with any GUI software.
...
Also, option 2
...
is likely to be faster for advanced operations and development processes with iam.
The figure below illustrates the two options for obtaining a live view image.
| Inc drawio | ||||
|---|---|---|---|---|
|
...
|
...
|
...
|
Quick Start Guide
| Confluence youtube macro video | ||||||||
|---|---|---|---|---|---|---|---|---|
|
The guide is structured in the following section
...
. By selection of “>” the
...
section´s content will expand.
| Expand | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
| Expand | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
| Expand | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
| Expand | ||
|---|---|---|
|
| Info |
|---|
Since the iAMGigE-server is preinstalled to cameras autostart. You can use GigEVision Software to recive camera images. |
| Tip |
|---|
For iam you nee the latest version of Synview Explorer. Please update your Host System. On can find a download link at the end of section Synview . |
...
...
Connect the camera to be tested
Start Synview Explorer on your Host System.
iam camera should apear in the list of found cameras - if not check previus section Configure your Network Controller
select it in the and press the Connect camera button.
...
...
Configure the camera features as desired. Pay attention especially to features in Image Format Control and Acquisition Control categories.
...
When prepared, click the Start acquisition button
the camera should start acquiring. If not, verify again, if the camera was not set to triggered mode, while no trigger was attached.
...
While the acquisition is active, you can still adjust the runtime parameters, such as exposure time or gain
But basic acquisition parameters, such as pixel format or trigger mode become locked when the acquisition starts.
...
When finished, click the Stop acquisition button and exit.
| Info |
|---|
if you want to learn more about Synview Explorer skip next section and read through section “Getting started with Synview Explorer - and become ready to try Option 2.” first. |
...
|
| Expand | ||
|---|---|---|
| ||
|
...
|
| Expand | |
|---|---|
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
| Expand | |
|---|---|
|
...
|
...
| ||||||
|
| Expand | ||
|---|---|---|
| ||
will come soon… |
🔍 References
🔗 related content
👥 contact NET
| Insert excerpt | ||||||
|---|---|---|---|---|---|---|
|