| Excerpt |
|---|
Change IP System Settings of iam
| Include Page | ||||
|---|---|---|---|---|
|
...
Configuring the Network Controller
...
The configuration of
...
your network controller depends on your
...
operating system (OS).
In case of using a virtual guest system configure only the host network controller!
| Note |
|---|
One can improve Improve the network performance considerably by configuring the network controller properly. See section “jumbo frames” and |
Connecting to the Camera
The camera is designed to be remote remotely controlled over OpensshOpenSSH.
After power up it will take some time before the camera will responds respond due to the booting of the Linux system.
...
The ping terminal command can be applied to see if the camera has booted:
...
| Info |
|---|
In the abscence of a Linux or Mac host system NET provides a virtual machine image. How to set up the virtual machine is described in section Application Development / Virtual Host System below. See also section Communicate with iam over windows host - without the virtual machine. |
...
| Info |
|---|
Under Linux and Mac the same physical network controller with multiple virtual controller settings is applicable. Therefore it is not necessary to change the current network setting. Instead, just add a new virtual controller. |
...
Windows 10
Open the Windows 10 Windows10 start menu by pressing the Windows key on the keyboard. Type the words
Control Paneland press enter.Click the link titled
View network status and tasksunder theNetwork and Internetheading.Click the link on the left of the window labeled
Change adapter settings.Right click on network adapter and choose
propertiesto open up the properties window.Find the option of
Internet Protocol Version 4 (TCP/IPv4)and click on it. Then choose optionProperties, e.g. as shown below.
...
Test the connection with the ping command , first on the host system and than inside the virtual maschine machine if using a virtual guest system.
...
| Info |
|---|
Jumbo frames are Ethernet frames with more than 1500 bytes of payload, the limit set by the IEEE 802.3 standard. In particular, GigE Vision jumbo frames can improve network performance massively since image data is originally high-volume data. |
Windows:
...
Activating jumbo frames
Follow steps 1 to 4 in the section above.
...
| Info |
|---|
Interrupt Moderation is a feature that groups packets together and sends them as a batch. It can be responsible for sluggish behavior of the connection. For a continues continuous image data transmission this feature is not very useful. |
Windows: Disable
...
Interrupt Moderation
For diable disable this feature follow the Steps 1. to 4. from the section above.
From the
property windowclick onConfigure
From
Select the second tab from the new window select the second tab
AdvancedLook for the Property property
Interrupt ModerationSelect the
Disable
...
Helpful content: Blogpost about how to Optimizing Ethernet Adapter Settings for Maximum Performance (external link).
...