...
Linux and MacOSX supports openSSH with X-Server forwarding natively. In case of Windows some special tools are required. In this section an introduction is given.
After the step “configure your windows ethernet adapter” the settings can be tested with ping command:
| Code Block |
|---|
ping 192.168.1.10 |
System
...
Requiremqents:
In order to view a live stream, for example with synview running on the camera, procede accordingly:
Install putty PuTTY on your Windows machine
Putty PuTTY will execute the sshSSH-connection to iam.Install Xming
Xming executes the graphical interface on Windows.Installing WinSCP is helpful on any host system.
WinSCP is a program to transfer files from and to iam.
The mentioned tools for Win64 can be downloaded here:
...
.
...
WinSCP - File transfer to camera
...
| Info |
|---|
WinSCP is a program to transfer files from and to iam: https://winscp.net/eng/docs/lang:de |
...
When starting Xming for the first time, the Windows firewall may ask you to to create an exception for Xming.
Configuration of
...
PuTTY:
Insert the iam IP address
192.168.1.10in "Session→Host name"
...
| Tip |
|---|
User: Password: |
...
WinSCP, PuTTY and Xming - Put everyting together
It is possible to start PuTTY with the same settings from WinSCP
...
For achiving X-Server forwarding as well it is necessary to edit the “WinSCP temporary session” settings in PuTTY once:
...
| Tip |
|---|
Do not forget to save afterwards! |
Start SynView:
Type into the console:
|
| Info |
|---|
It is a common source of errors to operate a monochrome sensor in the color space. For monochrome sensors change the |
...
Please be aware of the low frame refresh rate with this type of connection.
A better refresh rate will be achieved with the "GigE Vision server of SynviewSynView" in the future.
For more information see section Synview SynView above.
Start
...
HALCON viewer from then test_halcon_samples:
| Info |
|---|
Halcon HALCON can be preinstalled pre-installed to the camera. See Halcon HALCON for more information. |
Type into the console:
|
| Info |
|---|
"Image Format Control → Pixel Format" to Mono8 is set inside "test_halcon_live_view" |
For more information see section Halcon.Attachments
...