| Excerpt |
|---|
...
Getting
...
started with the Windows Host System
Introduction
Linux and MacOSX supports openSSH with X-Server Forwarding nativforwarding natively. In case of windows Windows some special tool tools are required. In this section an introduction is given.
Once you have After the step “configure your windows ethernet adapter you can test ” the settings can be tested with ping command:
| Code Block |
|---|
ping 192.168.1.10 |
System
...
Requiremqents:
In order to view a live stream, for example with synview running on the camera, you can use the tools listed below.procede accordingly:
Install putty PuTTY on your windows Windows machine
putty PuTTY will do execute the sshSSH-connection to the iam-camera.Install Xming
Xming will do executes the graphical interface on windowsWindows.Install Installing WinSCP is usefull helpful on any host system.
WinSCP is a program to transfer files from /and to the iam camera.
The tools above for Win64 can be downloaded from below.
| Attachments | ||||
|---|---|---|---|---|
|
...
WinSCP - File transfer to camera
| Info |
|---|
WinSCP is a program to transfer files from /and to the iam camera: https://winscp.net/eng/docs/lang:de |
The configuration of WinSCP should look like followsalike:
...
The iam camera asks for a password.
| Tip |
|---|
The password is |
PuTTY and Xming - Open applications with graphical user interfaces:
Xming
For using To apply X-Server forwarding on need to start the Xming Server server first. You should have a link in your windows start menueA link should be in the Windows start menu.
| Tip |
|---|
After launching on should see , the Xming Symbol |
If you start When starting Xming for the first time, you may get asked by the windows Windows firewall may ask you to create an exception for Xming.
Configuration of
...
PuTTY:
Insert the iam ip IP address
192.168.1.10in "Session→Host name"
...
Configure "Connection->SSH→X11" as follows:
...
| Info |
|---|
A link to a configuration Configuration help page: http://www.geo.mtu.edu/geoschem/docs/putty_install.html |
If you connect When connecting to iam the first time you may get asket , the following warning . You need to may show up. To procede, confirm with "yes".
...
After opening that connection, login as
| Tip |
|---|
User: Password: |
...
WinSCP, PuTTY and Xming - Put everyting together
It is possible to start PuTTY with the same settings from WinSCP
...
For achiving X-Server forwarding as well it is necessary to edit the “WinSCP temporary session” settings in PuTTY once:
...
| Tip |
|---|
Do not forget to save afterwards! |
Start SynView:
Type into the console:
|
| Info |
|---|
It is a common source of errors to operate an monochrom a monochrome sensor in the colour color space. If you reviced an monochrome sensor you should For monochrome sensors change the |
Please be aware , that you get only a of the low frame refresh rate with this type of connection.
A better refresh rate will be achieved with the "GigEvision GigE Vision server of synviewSynView" in the future.
For more information see section Synview SynView above.
Start
...
HALCON viewer from then test_halcon_samples:
| Info |
|---|
Halcon HALCON can be preinstalled pre-installed to your the camera. See Halcon fore HALCON for more information. |
Type into the console:
|
| Info |
|---|
"Image Format Control → Pixel Format" to Mono8 is set inside "test_halcon_live_view" |
For more information see section Halcon.Attachments
...