| Excerpt |
|---|
...
Getting started with the Windows Host System
Introduction
Linux and
...
MacOSX supports openSSH with X-Server
...
forwarding natively. In case of
...
Windows some special
...
tools are required. In this section
...
an introduction is given.
...
After the step “configure your windows ethernet adapter
...
” the settings can be tested with ping command:
| Code Block |
|---|
ping 192.168.1.10 |
System
...
Requiremqents:
In order to view a live stream, for example with synview
...
running on the camera, procede accordingly:
Install PuTTY on your Windows machine
PuTTY will execute the SSH-connection to iam.Install Xming
Xming
...
executes the graphical interface on
...
Windows.
...
Installing WinSCP is helpful on any host system.
WinSCP is a program to transfer files from
...
and to
...
iam
...
The tools above for Win64 can be downloaded from below.
...
.
...
WinSCP -
...
File transfer to camera
...
| Info |
|---|
WinSCP is a program to transfer files from |
...
and to |
...
iam |
...
The configuration of WinSCP should look
...
alike:
...
...
iam
...
asks for a password.
| Tip |
|---|
The password is |
PuTTY and Xming - Open applications with graphical user interfaces:
Xming
...
To apply X-Server forwarding
...
start the Xming
...
server first.
...
A link should be in the Windows start menu.
| Tip |
|---|
After launching |
...
, the Xming Symbol |
...
the task bar. |
...
When starting Xming for the first time,
...
the
...
Windows firewall may ask you to create an exception for Xming.
Configuration of
...
PuTTY:
Insert the iam
...
IP address
192.168.1.10in "Session→Host name"
...
Configure "Connection->SSH→X11" as follows:
...
| Info |
|---|
...
Configuration help page: http://www.geo.mtu.edu/geoschem/docs/putty_install.html |
...
When connecting to iam the first time
...
, the following warning
...
may show up. To procede, confirm with "yes".
...
...
After opening that connection, login as
| Tip |
|---|
User: Password: |
WinSCP, PuTTY and Xming - Put everyting together
It is possible to start PuTTY with the same settings from WinSCP
...
For achiving X-Server forwarding as well it is necessary to edit the “WinSCP temporary session” settings in PuTTY once:
...
| Tip |
|---|
...
Do not forget to save afterwards! |
Start SynView:
Type into the console:
|
| Info |
|---|
It is |
...
a common |
...
source of |
...
errors to operate |
...
a monochrome sensor in the |
...
color space. |
...
For monochrome sensors change the |
Please be aware
...
of the low frame refresh rate with this type of connection.
A better refresh rate will be achieved with the "
...
GigE Vision server of
...
SynView" in the future.
For more information see section
...
SynView above.
Start
...
HALCON viewer from then test_halcon_samples:
| Info |
|---|
...
HALCON can be |
...
pre-installed to |
...
the camera. See |
...
HALCON for more information. |
Type into the console:
|
| Info |
|---|
"Image Format Control → Pixel Format" to Mono8 is set inside "test_halcon_live_view" |
For more information see section
...
| Attachments |
|---|
🔍 References
👥 contact NET
...
HALCON .
...