| Excerpt |
|---|
...
Getting
...
started with the Windows Host System
Introduction
Linux and MacOSX supports openSSH with X-Server Forwarding nativforwarding natively. In case of windows Windows some special tool tools are required. In this section an introduction is given.
Once you have After the step “configure your windows ethernet adapter you can test ” the settings can be tested with ping command:
| Code Block |
|---|
ping 192.168.1.10 |
...
In order to view a live stream, for example with synview running on the camera, you can use the tools listed below.procede accordingly:
Install putty on your windows Windows machine
putty Putty will do execute the ssh-connection to the iam-camera.Install Xming
Xming will do executes the graphical interface on windowsWindows.Install Installing WinSCP is usefull helpful on any host system.
WinSCP is a program to transfer files from /and to the iam camera.
The mentioned tools above for Win64 can be downloaded from below.here:
| Attachments | ||||
|---|---|---|---|---|
|
WinSCP - Filetransfer File transfer to camera:
| Info |
|---|
WinSCP is a program to transfer files from /and to the iam camera: https://winscp.net/eng/docs/lang:de |
The configuration of WinSCP should look like followsalike:
...
The iam camera asks for a password.
| Tip |
|---|
The password is |
PuTTY and Xming - Open applications with graphical user interfaces:
Xming
For using To apply X-Server forwarding on need to start the Xming Server server first. You should have a link in your windows start menueA link should be in the Windows start menu.
| Tip |
|---|
After launching on should see , the Xming Symbol |
If you start When starting Xming for the first time, you may get asked by the windows Windows firewall may ask to to create an exception for Xming.
Configuration of putty:
Insert the iam ip IP address
192.168.1.10in "Session→Host name"
...
Configure "Connection->SSH→X11" as follows:
...
| Info |
|---|
A link to a configuration Configuration help page: http://www.geo.mtu.edu/geoschem/docs/putty_install.html |
If you connect When connecting to iam the first time you may get asket , the following warning . You need to may show up. To procede, confirm with "yes".
...
After opening that connection, login as
| Tip |
|---|
User: Password: |
Start
...
Synview:
Type into the console:
|
...
| Info |
|---|
It is a common source of errors to operate an monochrom a monochrome sensor in the colour color space. If you reviced an monochrome sensor you should For monochrome sensors change the |
Please be aware , that you get only a of the low frame refresh rate with this type of connection.
A better refresh rate will be achieved with the "GigEvision GigE Vision server of synviewSynview" in the future.
For more information see section Synview above.
Start
...
Halcon viewer from then test_halcon_samples:
| Info |
|---|
Halcon can be preinstalled to your the camera. See Halcon fore for more information. |
Type into the console:
|
...