...
| Info |
|---|
Configure your Network Controller depens depends on your operation system (OS) |
...
| Note |
|---|
On can improve network performance massifly massively by configure your network controller properly. See section “jumbo frames” and |
...
After power up it will take some time while the linux system is booting before the camera will responsresponds.
You need to configure your network controller properly as described below before you can use the ping command.
...
| Info |
|---|
Under Linux and Mac on can use the same physical netzwork controller with multible virtuall controller settings - therefore it is not nessasary necessary to change your current network setting - just add a new virtual controller instead. |
...
| Info |
|---|
Jumbo frames are Ethernet frames with more than 1500 bytes of payload, the limit set by the IEEE 802.3 standard. In particular in the context of GigEVISION jumbo frames can improve network performance massivly massively since image data are tradionaly high volume data. |
...
follow the Steps 1. to 4. from the section above.
From the
propertie property windowclick onConfigure
From the new window select the secound second tab
AdvancedLook for the Property
Jumbo PacketsSelect the highest value, eg.
9014 Bytes
Confirm with
OK
...
| Info |
|---|
Interrupt Moderation is a feature that groups packets together and sends them as a batch. It It can be responsible for sluggish tuning behavior of the radioconnection. For a continues image data transmission this feature is not verry usefullvery useful. |
Windows: Disable Interupt Moderation
For diable this feature follow the Steps 1. to 4. from the section above.
From the
propertie property windowclick onConfigureFrom the new window select the secound second tab
AdvancedLook for the Property
Interrupt ModerationSelect the
Disable
...