WARNING

*1: “Serious injury” refers to cases of loss of eyesight, wounds, burns (high or low temperature), electric shock, broken bones, poisoning, etc., which leave after-effects or which requires hospitalization or a long period of outpatient treatment of cure.

*2:         "Light to moderate injuries" refers to injuries, burns, electric shock etc. that do not require hospitalization or long-term treatment.

*3:         "Property damage" refers to cases of extensive damage involving damage to buildings, equipment, farm animals, pet animals and other belongings.

PROHIBITED

MANDATORY

Risk of burns

A camera in operation can reach temperature levels which could cause burns

Injury by falling cameras or lenses

A falling camera or lens can cause injury.

Risk of cuts by sharp edges of lens mounts

The threads of the lens mount and mounting points can have sharp edges.

Unplug

Stop operation immediately when any abnormality or defect occurs. If abnormal conditions are present, such as smoke, a burning smell, ingress of water or foreign matter, or if the equipment is dropped or malfunctions, fire or electric shock may result. Be always sure to disconnect the power cable from the wall socket at once and contact your dealer.

Never pull apart

Do not disassemble, repair, or modify the equipment. Otherwise, fire or electric shock may result.  For internal repair, inspection, or cleaning, contact your sales representative.

Avoid

Do not place anything on the equipment. If metallic objects, liquid, or other foreign matter enters the equipment, fire or electric shock may result.

Avoid

Do not install the equipment in an unstable or inclined location or locations subject to vibration or impact. Otherwise, the equipment may topple over and cause personal injury.

Do not touch

During an electrical storm, do not touch the power cable and the connection cable. Otherwise, an electric shock may result.

Avoid

Do not handle roughly, damaged, fabricated, bent forcefully, pulled, twisted, bundled, placed under heavy objects or heated the power cable and the connection cable. Otherwise, fire or electric shock may result.

Avoid

Do not give strong impact against the equipment. It may cause the trouble.

Avoid

Do not expose the camera head to any intensive light (such as direct sunlight). Otherwise, its inner image pickup device might get damaged.

Avoid short-circuiting signal output. Otherwise, a malfunction may occur.

Avoid giving a strong shock against the camera body. It might cause a breakdown or damage. If your camera is used in a system where its camera connector is subjected to strong repetitive shocks, its camera connector is possible to break down. If you intend to use your camera in such a situation, if possible, bundle and fix a camera cable in the place near the camera, and do not transmit a shock to the camera connector.